Home > KVP™ Barrels > AR Barrel Parts
Sort By:
Page of 1
KVP AR-15 Standard Gas Block KVP AR-15 Standard Gas Block

KVP's low profile gas blocks are designed with the builder in mind. KVP Gas Blocks feature a threaded gas tube retention pin that eliminates the installation awkwardness surrounding tiny gas tube roll pins! The KVP gas tube retention pin and the gas-block install with the same 3/32" Allen wrench. NO special tools required!

Machined from USA Steel and Black Oxide Finished.

Comes with:
(2) Set Screws
(1) Threaded Gas Tube Retention Pin

Note: Thread locker is suggested.

Our Price: $29.95
KVP AR-15 Adjustable Gas Block KVP AR-15 Adjustable Gas Block

KVP's adjustable low profile gas blocks are designed with the builder in mind. KVP Gas Blocks feature a threaded gas tube retention pin that eliminates the installation awkwardness surrounding tiny gas tube roll pins! The KVP gas tube retention pin, gas adjustment screw, and the gas-block all install/adjust with the same 3/32" Allen wrench. NO additional tools required!

Machined from USA Steel and Black Oxide Finished.

Comes with:
(2) Set Screws
(1) Adjustable Screw
(1) Threaded Gas Tube Pin

Note: Thread locker is suggested.

Our Price: $44.95
KVP AR-15 Gas Block Dimpling Jig KVP .750 AR-15 Gas Block Dimpling Jig

Our 6-position dimpling jig is designed to allow you to easily dimple your own barrel. The 6 different, laser-marked spacing sets allow for a variety of gas block applications. The jig will fit perfectly in any bench vise to allow easy dimpling. Spacing is to the center of the 5/32" drill guide holes: .400, .420, .450, .460, .470, and .500.

Machined from US Steel and QPQ Heat Treated.

Comes with:
(1) Alignment set screw
(1) Non-marring set screw

NOT Included: 5/32" Drill Bit/Spot Drill needed for cutting the dimples.


Our Price: $34.95
KVP AR-15 Gas Block Dimpling Jig KVP .625 AR-15 Gas Block Dimpling Jig

Our 6-position dimpling jig is designed to allow you to easily dimple your own barrel. The 6 different, laser-marked spacing sets allow for a variety of gas block applications. The jig will fit perfectly in any bench vise to allow easy dimpling. Spacing is to the center of the 5/32" drill guide holes: .400, .420, .450, .460, .470, and .500.

Machined from US Steel and QPQ Heat Treated.

Comes with:
(1) Alignment set screw
(1) Non-marring set screw

NOT Included: 5/32" Drill Bit/Spot Drill needed for cutting the dimples.


Our Price: $34.95
KVP AR-15 Gas Block Dimpling Jig KVP .936 AR-15 Gas Block Dimpling Jig

Our 6-position dimpling jig is designed to allow you to easily dimple your own barrel. The 6 different, laser-marked spacing sets allow for a variety of gas block applications. The jig will fit perfectly in any bench vise to allow easy dimpling. Spacing is to the center of the 5/32" drill guide holes: .400, .420, .450, .460, .470, and .500.

Machined from US Steel and QPQ Heat Treated.

Comes with:
(1) Alignment set screw
(1) Non-marring set screw

NOT Included: 5/32" Drill Bit/Spot Drill needed for cutting the dimples.


Our Price: $34.95