There are many ways to smooth the operation of a suppressed/big bore AR-15 Carbine. One of the most cost effective and quickest upgrades available, is the installation of a KVP™ H3 tungsten buffer. The KVP H3 utilizes three dense tungsten weights to achieve the 5.4 ounce buffer weight. There are many added benefits once you install a KVP™ H3 buffer. Benefits include: increased reliability, reduced wear and tear on critical internal parts, reduction in felt recoil, and reduction in bolt bounce. Manufactured to meet the highest quality, KVP™ Heavy H3 Tungsten Buffers are a great option for the AR-15 platform.NOTE: Due to tungsten weight variation actual buffer weight may vary slightly +/- 5%.
Pistol caliber carbines such as 9mm, .40 S&W, .45 ACP, and 10mm are a blast to shoot but can be tough on AR-15's internal components. Without a properly tuned blowback system, you run the risk of being overly destructive on internal lower parts. Running a blowback AR15 with a suppressor can further increase the risk for damage. Starting out your build with the KVP PCC Milspec kit is a great way to give your blowback system a fighting chance. Do yourself a favor and fine tune your setup for the softest shooting PCC possible. This kit is perfect for those who are building a Blowback Pistol Caliber Carbine rifle or SBR. This kit contains everything needed to install Mil-Spec diameter stocks from Magpul, BCM, MFT, Luth-AR, and many others.
Pistol caliber carbines such as 9mm, .40 S&W, .45 ACP, and 10mm are a blast to shoot but can be tough on AR-15's internal components. Without a properly tuned blowback system, you run the risk of being overly destructive on internal lower parts. Running a blowback AR15 with a suppressor can further increase the risk for damage. Starting out your build with the KVP PCC Milspec kit is a great way to give your blowback system a fighting chance. The KVP 10oz tungsten blowback buffer helps tame the destructive forces in suppressed and standard blowback AR-15's. Do yourself a favor and fine tune your setup for teh sofest shooting PCC possible! This kit is perfect for those who are building a Blowback Pistol Caliber Carbine rifle or SBR. This kit contains everything needed to install Mil-Spec diameter stocks from Magpul, BEM, MFT, Luth-AR, and many others.Due to tungsten weight variation, actual weight of the buffer is between 10.3 and 10.5 ounces.
All Parts made in the USA!
This kit is perfect for those who are looking to utilize a Sig-Brace, or other standard aftermarket pistol tube braces/accessories. The KVP pistol kit utilizes a standard castle nut and end plate for attachment to a lower receiver. This attachment method does away with the need for a strap wrench.There are many ways to smooth the operation of a AR-15 Carbine. One of the most cost effective and quickest upgrades available, is installation of a KVP™ Heavy Tungsten Buffer. There are many added benefits once you install a KVP™ tungsten buffer. Benefits include: increased reliability, reduced wear and tear of critical internal parts, reduction in felt recoil, reduction in bolt bounce, as well as eliminating the annoying "rattle" of standard carbine buffers. Manufactured to meet the highest quality, KVP™ Heavy Tungsten Buffers are within a tolerance of +/- .005 oz, resulting in a more consistent, higher quality buffer.
Note: This tube doesn't work with the KAK Blade without modification.
This kit is perfect for those who are looking to utilize a Sig-Brace, or other standard aftermarket pistol tube braces/accessories. The KVP pistol kit utilizes a standard castle nut and end plate for attachment to a lower receiver. This attachment method does away with the need for a strap wrench.There are many ways to smooth the operation of a suppressed/big bore AR-15 Carbine. One of the most cost effective and quickest upgrades available, is the installation of a KVP™ H3 tungsten buffer. The KVP H3 utilizes three dense tungsten weights to achieve the 5.4 ounce buffer weight. There are many added benefits once you install a KVP™ H3 buffer. Benefits include: increased reliability, reduced wear and tear on critical internal parts, reduction in felt recoil, and reduction in bolt bounce. Manufactured to meet the highest quality, KVP™ Heavy H3 Tungsten Buffers are a great option for the AR-15 platform.NOTE: Due to tungsten weight variation actual buffer weight may vary slightly +/- 5%.
This kit is perfect for those who are looking to utilize a Sig-Brace, or other standard aftermarket pistol tube braces/accessories. The KVP pistol kit utilizes a standard castle nut and end plate for attachment to a lower receiver. This attachment method does away with the need for a strap wrench.
Pistol caliber carbines such as 9mm, and .40 S&W, .are a blast to shoot but can be tough on AR-15's internal components. Without a properly tuned blowback system, you run the risk of being overly destructive on internal lower parts. Running a blowback AR15 with a suppressor can further increase the risk for damage. Do yourself a favor and fine tune your setup for the softest shooting PCC possible with a 7.5 oz buffer and Extra Power Spring. This kit is perfect for those who are building a PCC Blowback Pistol.Note: This tube doesn't work with the KAK Blade without modification.
Pistol caliber carbines such as .45 ACP, and 10mm are a blast to shoot but can be tough on AR-15's internal components....Add a suppressor, and the increased back pressure can cause tremendous damage, without properly tuning your blowback system. The KVP 10 oz tungsten blowback buffer helps tame the destructive forces in suppressed and standard 9mm, 10mm, 40 S&W, and .45 ACP blowback AR15's. Do yourself a favor and fine tune your setup for the softest shooting PCC possible!Due to tungsten weight variation, actual weight of the buffer is between 10.3 and 10.5 ounces.Note: This tube doesn't work with the KAK Blade without modification.
