Home > KVP™ Barrels
Choose a sub category:
9mm Barrels AR Barrel Parts
Kaw Valley Precision AR-15 9mm barrels.
Sort By:
Page of 1
KVP AR-15 Standard Gas Block KVP AR-15 Standard Gas Block

KVP's low profile gas blocks are designed with the builder in mind. KVP Gas Blocks feature a threaded gas tube retention pin that eliminates the installation awkwardness surrounding tiny gas tube roll pins! The KVP gas tube retention pin and the gas-block install with the same 3/32" Allen wrench. NO special tools required!

Machined from USA Steel and Black Oxide Finished.

Comes with:
(2) Set Screws
(1) Threaded Gas Tube Retention Pin

Note: Thread locker is suggested.

Our Price: $29.95
KVP AR-15 Gas Block Dimpling Jig KVP .750 AR-15 Gas Block Dimpling Jig

Our 6-position dimpling jig is designed to allow you to easily dimple your own barrel. The 6 different, laser-marked spacing sets allow for a variety of gas block applications. The jig will fit perfectly in any bench vise to allow easy dimpling. Spacing is to the center of the 5/32" drill guide holes: .400, .420, .450, .460, .470, and .500.

Machined from US Steel and QPQ Heat Treated.

Comes with:
(1) Alignment set screw
(1) Non-marring set screw

NOT Included: 5/32" Drill Bit/Spot Drill needed for cutting the dimples.


Our Price: $34.95
KVP AR-15 Gas Block Dimpling Jig KVP .625 AR-15 Gas Block Dimpling Jig

Our 6-position dimpling jig is designed to allow you to easily dimple your own barrel. The 6 different, laser-marked spacing sets allow for a variety of gas block applications. The jig will fit perfectly in any bench vise to allow easy dimpling. Spacing is to the center of the 5/32" drill guide holes: .400, .420, .450, .460, .470, and .500.

Machined from US Steel and QPQ Heat Treated.

Comes with:
(1) Alignment set screw
(1) Non-marring set screw

NOT Included: 5/32" Drill Bit/Spot Drill needed for cutting the dimples.


Our Price: $34.95
KVP AR-15 Gas Block Dimpling Jig KVP .936 AR-15 Gas Block Dimpling Jig

Our 6-position dimpling jig is designed to allow you to easily dimple your own barrel. The 6 different, laser-marked spacing sets allow for a variety of gas block applications. The jig will fit perfectly in any bench vise to allow easy dimpling. Spacing is to the center of the 5/32" drill guide holes: .400, .420, .450, .460, .470, and .500.

Machined from US Steel and QPQ Heat Treated.

Comes with:
(1) Alignment set screw
(1) Non-marring set screw

NOT Included: 5/32" Drill Bit/Spot Drill needed for cutting the dimples.


Our Price: $34.95
KVP AR-15 Adjustable Gas Block KVP AR-15 Adjustable Gas Block

KVP's adjustable low profile gas blocks are designed with the builder in mind. KVP Gas Blocks feature a threaded gas tube retention pin that eliminates the installation awkwardness surrounding tiny gas tube roll pins! The KVP gas tube retention pin, gas adjustment screw, and the gas-block all install/adjust with the same 3/32" Allen wrench. NO additional tools required!

Machined from USA Steel and Black Oxide Finished.

Comes with:
(2) Set Screws
(1) Adjustable Screw
(1) Threaded Gas Tube Pin

Note: Thread locker is suggested.

Our Price: $44.95
Kaw Valley Precision 4.5" 9MM 4150 QPQ AR-15 Barrel Kaw Valley Precision 4.5" 9MM 4150 QPQ AR-15 Barrel

  • Kaw Valley Precision 9MM Barrels are button rifled out of 4150 CMV Steel, QPQ Salt Bath Nitrided, with an 11-degree target crown for the best accuracy and durability possible.

    KVP 9MM barrels have an integrated feed ramp and will work with both Colt and Glock style AR-9 rifles or pistols. All barrels are manufactured under ISO:9001 & AS:9100 quality certifications.
  • Product Specifications:

    • Barrel Material: 4150 CMV Steel
    • Barrel Type: Button Rifled
    • Barrel Caliber: 9MM SAAMI (9x19mm Parabellum)
    • Barrel Twist: 1:10
    • Barrel Length: 4.5”
    • Barrel Profile: Light (.740" at the thinnest cross-section)
    • Inside Finish: Black QPQ Salt Bath Nitride
    • Outside Finish: Black QPQ Salt Bath Nitride
    • Muzzle Thread: 1/2x36" TPI (Threads Per Inch)
    • Barrel Extension: AR15 (Will work with any Milspec AR15 Upper Receiver)
    • Weight: 9.5oz
    • Integrated feed ramp
    • Designed to work with both Colt and Glock style AR-9 builds
    • 11-degree Target Crown


Our Price: $109.95
Kaw Valley Precision 8.5" 9MM 4150 QPQ AR-15 Barrel Kaw Valley Precision 8.5" 9MM 4150 QPQ AR-15 Barrel

  • Kaw Valley Precision 9MM Barrels are button rifled out of 4150 CMV Steel, QPQ Salt Bath Nitrided, with an 11-degree target crown for the best accuracy and durability possible.

    KVP 9MM barrels have an integrated feed ramp and will work with both Colt and Glock style AR-9 rifles or pistols. All barrels are manufactured under ISO:9001 & AS:9100 quality certifications.
  • Product Specifications:

    • Barrel Material: 4150 CMV Steel
    • Barrel Type: Button Rifled
    • Barrel Caliber: 9MM SAAMI (9x19mm Parabellum)
    • Barrel Twist: 1:10
    • Barrel Length: 8.5”
    • Barrel Profile: Light (.675" at the thinnest cross-section)
    • Inside Finish: Black QPQ Salt Bath Nitride
    • Outside Finish: Black QPQ Salt Bath Nitride
    • Muzzle Thread: 1/2x36" TPI (Threads Per Inch)
    • Barrel Extension: AR15 (Will work with any Milspec AR15 Upper Receiver)
    • Weight: 13.8oz
    • Integrated feed ramp
    • Designed to work with both Colt and Glock style AR-9 builds
    • 11-degree Target Crown

Our Price: $114.95
Kaw Valley Precision 8.5" 9MM 4150 QPQ AR-15 Barrel Kaw Valley Precision 10.5" 9MM 4150 QPQ AR-15 Barrel

  • Kaw Valley Precision 9MM Barrels are button rifled out of 4150 CMV Steel, QPQ Salt Bath Nitrided, with an 11-degree target crown for the best accuracy and durability possible.

    KVP 9MM barrels have an integrated feed ramp and will work with both Colt and Glock style AR-9 rifles or pistols. All barrels are manufactured under ISO:9001 & AS:9100 quality certifications.
  • Product Specifications:

    • Barrel Material: 4150 CMV Steel
    • Barrel Type: Button Rifled
    • Barrel Caliber: 9MM SAAMI (9x19mm Parabellum)
    • Barrel Twist: 1:10
    • Barrel Length: 10.5”
    • Barrel Profile: Light (.675" at the thinnest cross-section)
    • Inside Finish: Black QPQ Salt Bath Nitride
    • Outside Finish: Black QPQ Salt Bath Nitride
    • Muzzle Thread: 1/2x36" TPI (Threads Per Inch)
    • Barrel Extension: AR15 (Will work with any Milspec AR15 Upper Receiver)
    • Weight: 16.2oz
    • Integrated feed ramp
    • Designed to work with both Colt and Glock style AR-9 builds
    • 11-degree Target Crown

Our Price: $119.95
Kaw Valley Precision 16" 9MM 4150 QPQ AR-15 Barrel Kaw Valley Precision 16" 9MM 4150 QPQ AR-15 Barrel

  • Kaw Valley Precision 9MM Barrels are button rifled out of 4150 CMV Steel, QPQ Salt Bath Nitrided, with an 11-degree target crown for the best accuracy and durability possible.

    KVP 9MM barrels have an integrated feed ramp and will work with both Colt and Glock style AR-9 rifles or pistols. All barrels are manufactured under ISO:9001 & AS:9100 quality certifications.

    Product Specifications:

    • Barrel Material: 4150 CMV Steel
    • Barrel Type: Button Rifled
    • Barrel Caliber: 9MM SAAMI (9x19mm Parabellum)
    • Barrel Twist: 1:10
    • Barrel Length: 16.25”
    • Barrel Profile: Light (.675" at the thinnest cross-section)
    • Inside Finish: Black QPQ Salt Bath Nitride
    • Outside Finish: Black QPQ Salt Bath Nitride
    • Muzzle Thread: 1/2x36" TPI (Threads Per Inch)
    • Barrel Extension: AR15 (Will work with any Milspec AR15 Upper Receiver)
    • Weight: 23.1oz
    • Integrated feed ramp
    • Designed to work with both Colt and Glock style AR-9 builds
    • 11-degree Target Crown

Our Price: $134.95